I am sorry but I think I do not understand what you mean.

ceturtd., 2026. g. 19. nov., plkst. 17:48 — lietotājs andy pugh
(<[email protected]>) rakstīja:.
>
> Does the execution of the remap routine fall off the end of the
> routine in the case of those two tool numbers?
>

IMHO the fact that the command runs correctly in MDI tells me that
those routines are defined correctly.

Anyways, here is the main file: tool_change.ngc https://pastebin.com/TWXAzFcL
Here is the routine that unloads current tool: tool_put_move.ngc:
https://pastebin.com/gkYMbez2
Here is the routine that loads new tool: tool_get_move.ngc:
https://pastebin.com/wGiZH68c

>
> Is there anything special about them? A specific alternate toolhead,
> for example?
>

First 7 tools are on a servo-driven carousel that is engaged with
spindle by pneumatic cylinder. Tools 51-82 are drills that are on a
separate gang-drill block - driven all together by motor and just
extended to working position with pneumatic actuator, something like
this (you can seem main spindle on the edge of picture):
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTYOTbF55C322qtjtLB5onQ9r2XyTjfCcEXDh66wM6SZA&s=10

Let me know if you want to see the config as well.

Viesturs


_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to