On Mon Dec 04 14:57:41 2017, bertr...@jacquin.bzh wrote: > According to lm_sensors, all is fine: > > nct7904-i2c-0-2e > Adapter: SMBus I801 adapter at 1180 > in1: +1.04 V > in2: +0.43 V > in3: +1.50 V > in4: +0.51 V > in5: +1.27 V > in6: +1.26 V > in7: +1.83 V > in8: +1.46 V > in9: +0.94 V > in10: +0.82 V > in11: +1.50 V > in12: +2.01 V > in13: +1.50 V > in14: +2.01 V > in15: +3.37 V > in16: +3.22 V > in20: +3.32 V > fan1: 8035 RPM > fan2: 7714 RPM > fan3: 8333 RPM > fan4: 0 RPM > fan5: 7848 RPM > fan6: 8132 RPM > fan7: 0 RPM > fan8: 0 RPM > temp1: +36.9 C > temp2: +43.5 C > temp3: +51.8 C > > coretemp-isa-0000 > Adapter: ISA adapter > Physical id 0: +35.0 C (high = +84.0 C, crit = +94.0 C) > Core 0: +32.0 C (high = +84.0 C, crit = +94.0 C) > Core 1: +32.0 C (high = +84.0 C, crit = +94.0 C) > Core 2: +35.0 C (high = +84.0 C, crit = +94.0 C) > Core 3: +30.0 C (high = +84.0 C, crit = +94.0 C) > > coretemp-isa-0001 > Adapter: ISA adapter > Physical id 1: +38.0 C (high = +84.0 C, crit = +94.0 C) > Core 0: +36.0 C (high = +84.0 C, crit = +94.0 C) > Core 1: +34.0 C (high = +84.0 C, crit = +94.0 C) > Core 2: +38.0 C (high = +84.0 C, crit = +94.0 C) > Core 3: +38.0 C (high = +84.0 C, crit = +94.0 C) > > I'm not really sure if I should trust lm_sensors or the buzz. >
As of right now the light and buzzer are still going off, maybe the temperature is fine but one of the fans have failed, triggering the buzz. It's constantly on for 10 seconds at a time, then off for a while longer -- Jonathan Frederick Student Systems Engineer Oregon State University | Open Source Lab ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ enlightenment-devel mailing list enlightenment-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
