On Thu, 14 Aug 2025 10:43:52 -0700 Ross Vandegrift <r...@kallisti.us> said:
> RRR: modes for 'DP-4' are 0x55f3913f1e40 [24] > RRR: crtc on: 0 = 'DP-4' @ 2560 0 - 2560x1440 orient 1 mode a1 out 47 > RRR: modes for 'DP-3-2' are 0x55f3913f1e40 [24] > RRR: crtc on: 1 = 'DP-3-2' @ 0 0 - 2560x1440 orient 1 mode a1 out 49 > RRR: set vsize2: 5120x1440 > RRR: cur size: 7040x1440 > RRR: done config... so there at the end finally (lots of log i guess when lid was open at some point) at the very end e has decided 2 screens are to be on.. DP-4 and DP-3-2 with DP-4 to the right of DP-3-2 (first at 2560,0 the latter at 0,0 with a virtual size of 5120x1440) ... so it seems e has configured this right for 2 external screens and the lid closed. can you try enable "use command" in the screen setup config? it will use the xrandr cmdline (if it exists) to do it as opposed to xrandr protocol directly. but it seems the logic is doing the right thing. -- ------------- Codito, ergo sum - "I code, therefore I am" -------------- Carsten Haitzler - ras...@rasterman.com _______________________________________________ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
