On Fri, 15 Aug 2025 08:33:02 -0700 Ross Vandegrift <r...@kallisti.us> said:
> On Thu, Aug 14, 2025 at 11:17:50PM +0100, Carsten Haitzler wrote: > > On Thu, 14 Aug 2025 14:21:05 -0700 Ross Vandegrift <r...@kallisti.us> said: > > > > > On Thu, Aug 14, 2025 at 07:27:15PM +0100, Carsten Haitzler wrote: > > > > can you try enable "use command" in the screen setup config? it will > > > > use the xrandr cmdline (if it exists) to do it as opposed to xrandr > > > > protocol directly. but it seems the logic is doing the right thing. > > > > > > Thanks, it works. I compared RRR logs before and after, the only > > > surprise I can pick out of the first log is: > > > > > > > RRR: 'DP-4' is relative to 'eDP-1' > > > > > > That seems weird since eDP-1 is unconfigured - but I don't know that > > > it's wrong. > > > > ummm are you sure edp1 has NO config - you'd have nothing on screen when the > > lid is open then... ? > > This wasn't quite right: the xrandr position drop down showed > Unconfigured. eet -d had reasonable looking config. Sure enough I > tried starting undocked and nothing came up on the screen. why on earth would you leave that unconfigured... or well off... you would want it on... e will auto disable the screen as if its unplugged if the lid closes. > After rm .e/e/config/*/e_randr2* I got my screen back and was able to > configure my monitors. After this, eDP-1 says None instead of > Unconfigured. and then the other 2 are "left of" it or such or one is left of the others i left of that etc. > Roos > -- ------------- Codito, ergo sum - "I code, therefore I am" -------------- Carsten Haitzler - ras...@rasterman.com _______________________________________________ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
