Hi, User vlan : set port vlan fe.1.1 10 modify-egress Voice vlan : Set vlan egress 20 fe.1.1 tagged
If you are not looking for ciscodp or lldp-med parameter. Bye, Cordialement, Sylvain CONTI. Retis Communication Coordinateur Technique Agence Ile de France 19bis av du Quebec - ZA Courtaboeuf 91140 Villebon-sur-Yvette +33164531412 / +33678780747 Mailto:[email protected] ________________________________ De : Andy Middlehurst <[email protected]> À : Enterasys Customer Mailing List <[email protected]> Envoyé : Wed Nov 03 18:48:53 2010 Objet : RE: [enterasys] Voice Vlan on Enterasys Hi Lamine, I don’t know about the A/B series buy yes this is certainly possible on the C2/C3 with the following commands: set ciscodp status enable set ciscodp port vvid 3 <port-list> where 3 is the voice vlan. Remember to set the ports as egressing vlan 3 TAGGED. ie: set vlan egress 3 fe.3.11-20 tagged Regards, Andy Middlehurst From: Lamine b [mailto:[email protected]] Sent: 03 November 2010 17:27 To: Enterasys Customer Mailing List Subject: [enterasys] Voice Vlan on Enterasys Hi, Is it possible to configure voice vlan on Enterasys C3,B3 and A2 switchs??? like cisco: switchport acces vlan 10 switchport voice vlan 20 Regards, Lamine * --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] * --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
