Hi, on the config guide of Enterasys switchs, we can read:
A Cisco DP port trust status of trusted or untrusted is only meaningful when a Cisco IP phone is connected to a switch port and a PC or other device is connected to the back of the Cisco IP phone. Whats happen if we use Alcated IP Phone? is it still possible to configure a port in Enterasys switchs (A2, B3 & C3) which will connect a PC + an IP phone for different data&voice vlans and tag voice trafic? Regards, Lamine --- En date de : Mer 3.11.10, Andy Middlehurst <[email protected]> a écrit : De: Andy Middlehurst <[email protected]> Objet: RE: [enterasys] Voice Vlan on Enterasys À: "Enterasys Customer Mailing List" <[email protected]> Date: Mercredi 3 novembre 2010, 18h48 Hi Lamine, I don’t know about the A/B series buy yes this is certainly possible on the C2/C3 with the following commands: set ciscodp status enable set ciscodp port vvid 3 <port-list> where 3 is the voice vlan. Remember to set the ports as egressing vlan 3 TAGGED. ie: set vlan egress 3 fe.3.11-20 tagged Regards, Andy Middlehurst From: Lamine b [mailto:[email protected]] Sent: 03 November 2010 17:27 To: Enterasys Customer Mailing List Subject: [enterasys] Voice Vlan on Enterasys Hi, Is it possible to configure voice vlan on Enterasys C3,B3 and A2 switchs??? like cisco: switchport acces vlan 10 switchport voice vlan 20 Regards, Lamine --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
