That command did the trick. So my config was correct, I just can't ping the VRRP IP address without this command?
On Tue, May 31, 2011 at 4:08 PM, Michael Votaw - VTI <[email protected] > wrote: > Just enter the command “vrrp accept-mode 1” and you will be able to ping > the virtual IP. Note that “1” is the VRRP id. > > > > > > *From:* Scott Van Artsdalen - MCC [mailto:[email protected]] > > *Sent:* Tuesday, May 31, 2011 5:10 PM > > *To:* Enterasys Customer Mailing List > *Subject:* [enterasys] VRRP question > > > > Another dumb question. We are trying to get VRRP working across two SSA's > and are unable to ping the vrrp address. > > > > Here is the config from SSA #1: > > > > interface vlan.0.2 > ip address 10.1.1.1 255.255.255.0 primary > vrrp create 1 v3-IPv4 > vrrp address 1 10.1.1.3 > vrrp priority 1 254 > vrrp enable 1 > ip pim sparse-mode > no shutdown > exit > > And SSA#2: > > > > interface vlan.0.2 > ip address 10.1.1.2 255.255.255.0 primary > vrrp create 1 v3-IPv4 > vrrp address 1 10.1.1.3 > vrrp priority 1 254 > vrrp enable 1 > ip pim sparse-mode > no shutdown > exit > > > > I can ping 10.1.1.3 from SSA#1 but not from anywhere else on our network. > I also cannot ping .3 from SSA#2. The only way we've been able to make this > work is to make the VRRP IP address the same as the VLAN IP address. Am I > missing a step? Obviously I must be. > > > > > -- > > *Scott VanArtsdalen > *Systems Support Manager > California IT Newspaper Operations - Modesto > 209-578-2199 > Just type Help (http://help) > > > > - --To unsubscribe from enterasys, send email to [email protected] with > the body: unsubscribe enterasys [email protected] > > ------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1375 / Virus Database: 1509/3671 - Release Date: 05/31/11 > > > - --To unsubscribe from enterasys, send email to [email protected] with > the body: unsubscribe enterasys [email protected] > > -- *Scott VanArtsdalen *Systems Support Manager California IT Newspaper Operations - Modesto 209-578-2199 Just type Help (http://help) --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
