Yes. It is enabled on the switch and port.
Patrick Printz Network Services Quinsigamond Community College 670 West Boylston Street Worcester, MA 01606-2092 w. 508-854-7517 c. 508-726-9529 "Opportunities multiply as they are seized." - Sun Tzu -----Original Message----- From: Kaiser, Markus [mailto:[email protected]] Sent: Wednesday, June 01, 2011 11:05 AM To: Enterasys Customer Mailing List Cc: Enterasys Customer Mailing List Subject: Re: [enterasys] RFC3580 Did you enable vlanauthorization? "set vlanauthorization ............" -Markus Sent via iPhone. On 01.06.2011, at 17:02, "Patrick Printz" <[email protected]> wrote: > That is what I have setup, but the VLAN is not being flipped. I will go > through it again and see if I am missing anything. > > > Patrick Printz > Network Services > > Quinsigamond Community College > 670 West Boylston Street > Worcester, MA 01606-2092 > w. 508-854-7517 > c. 508-726-9529 > > > > "Opportunities multiply as they are seized." > - Sun Tzu > > > -----Original Message----- > From: Kaiser, Markus [mailto:[email protected]] > Sent: Wednesday, June 01, 2011 10:57 AM > To: Enterasys Customer Mailing List > Cc: Enterasys Customer Mailing List > Subject: Re: [enterasys] RFC3580 > > RFC3850 Radius Attributes needed (three attributes): > > Tunnel-Type = "VLAN" > Tunnel-Medium-Type = "IEEE-802" > Tunnel-Private-Group-ID = "XXX" (Where X is the assigned VLAN Number) > > > Hope this helps. > > Cheers, > > Markus > > > Sent via iPhone. > > On 01.06.2011, at 16:48, "Patrick Printz" > <[email protected]<mailto:[email protected]>> wrote: > > I am toying around with RFC3580 to try and get it running on a test > switch, and I am wondering what values need to be returned by RADIUS to > set the VLAN of a port that authenticates properly. > > > Patrick Printz > Network Services > > Quinsigamond Community College > 670 West Boylston Street > Worcester, MA 01606-2092 > w. 508-854-7517 > c. 508-726-9529 > > > > "Opportunities multiply as they are seized." > - Sun Tzu > > > * --To unsubscribe from enterasys, send email to > <mailto:[email protected]> [email protected]<mailto:[email protected]> with > the body: unsubscribe enterasys > [email protected]<mailto:[email protected]> > > > --- > To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] > --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
