Which radius server? Do you use Policy Manager to enable authentication on the switch ports?
Does "show multiauth session" show the vlan id which is configured in radius? - Markus Sent via iPhone. On 01.06.2011, at 17:11, "Patrick Printz" <[email protected]> wrote: > Yes. It is enabled on the switch and port. > > > Patrick Printz > Network Services > > Quinsigamond Community College > 670 West Boylston Street > Worcester, MA 01606-2092 > w. 508-854-7517 > c. 508-726-9529 > > > > "Opportunities multiply as they are seized." > - Sun Tzu > > > -----Original Message----- > From: Kaiser, Markus [mailto:[email protected]] > Sent: Wednesday, June 01, 2011 11:05 AM > To: Enterasys Customer Mailing List > Cc: Enterasys Customer Mailing List > Subject: Re: [enterasys] RFC3580 > > Did you enable vlanauthorization? > > "set vlanauthorization ............" > > -Markus > > > > Sent via iPhone. > > On 01.06.2011, at 17:02, "Patrick Printz" <[email protected]> wrote: > >> That is what I have setup, but the VLAN is not being flipped. I will > go >> through it again and see if I am missing anything. >> >> >> Patrick Printz >> Network Services >> >> Quinsigamond Community College >> 670 West Boylston Street >> Worcester, MA 01606-2092 >> w. 508-854-7517 >> c. 508-726-9529 >> >> >> >> "Opportunities multiply as they are seized." >> - Sun Tzu >> >> >> -----Original Message----- >> From: Kaiser, Markus [mailto:[email protected]] >> Sent: Wednesday, June 01, 2011 10:57 AM >> To: Enterasys Customer Mailing List >> Cc: Enterasys Customer Mailing List >> Subject: Re: [enterasys] RFC3580 >> >> RFC3850 Radius Attributes needed (three attributes): >> >> Tunnel-Type = "VLAN" >> Tunnel-Medium-Type = "IEEE-802" >> Tunnel-Private-Group-ID = "XXX" (Where X is the assigned VLAN Number) >> >> >> Hope this helps. >> >> Cheers, >> >> Markus >> >> >> Sent via iPhone. >> >> On 01.06.2011, at 16:48, "Patrick Printz" >> <[email protected]<mailto:[email protected]>> wrote: >> >> I am toying around with RFC3580 to try and get it running on a test >> switch, and I am wondering what values need to be returned by RADIUS > to >> set the VLAN of a port that authenticates properly. >> >> >> Patrick Printz >> Network Services >> >> Quinsigamond Community College >> 670 West Boylston Street >> Worcester, MA 01606-2092 >> w. 508-854-7517 >> c. 508-726-9529 >> >> >> >> "Opportunities multiply as they are seized." >> - Sun Tzu >> >> >> * --To unsubscribe from enterasys, send email to >> <mailto:[email protected]> [email protected]<mailto:[email protected]> > with >> the body: unsubscribe enterasys >> [email protected]<mailto:[email protected]> >> >> >> --- >> To unsubscribe from enterasys, send email to [email protected] with the >> body: unsubscribe enterasys [email protected] >> >> --- >> To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] >> > > > --- > To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] > --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
