Hi, you should find manuals about what you intend to do by looking for the Feature Guides "Policy", "Authentication", and "Configuring VLANs". Go to the download page of www.enterasys.com (free registration required), select your switch, then Documentation, then Feature Guides.
You might find additional information by searching the knowledge base (https://cp-enterasys.kb.net/). Regards, Erik -- Dipl.-Inform. Erik Auerswald U:http://www.fg-networking.de/ E:[email protected] T:+49-631-4149988-0 M:+49-176-64228513 Gesellschaft für Fundamental Generic Networking mbH Geschäftsführung: Volker Bauer, Jörg Mayer Gerichtsstand: Amtsgericht Kaiserslautern - HRB: 3630 On Tue, 27 Mar 2012 16:19:53 +0200 "Podbiera, Jens" <[email protected]> wrote: >Hey guys, > >need a little bit assistance to configure vlan to policy. >Can´t found any tutorials on extranet to setup this >feature. >Has any one a manual? > >I take the follow steps: > >[Policy Manager] >1. create a role and setup the tab "Vlan Egress with Vlan >100" > >[NAC] >1. create a rule "Rule Name" -> Authentication is MAC and >End-System is in "End-System-Group" + New Nac Profile 2. >Nac Profile with created Accept Policy (with Vlan 100) > >After the enforce and authentication, the port has two >vlans, Vlan 100 an default vlan. >Thats my problem, i want only the 100 Vlan on this port >not the default vlan. > >If i setup the port manualy to a other vlan (400), i have >the same problem. >My Vlan 100 will added to the primary vlan on the port. > >Whats my mistake? > >Short Example: > >VLAN: 1 NAME: DEFAULT VLAN > VLAN Type: Default > Egress Ports >ge.1.4[Test Notebook], ge.1.48 [Uplink] > Forbidden Egress Ports >None. > Untagged ports >ge.1.4[Test Notebook], ge.1.48[Uplink] > >VLAN: 100 NAME: xXXx > VLAN Type: Permanent > Egress Ports >ge.1.4[Test Notebook], ge.1.48 [Uplink] > Forbidden Egress Ports >None. > Untagged ports >ge.1.4[Test Notebook] > >Example 2: >VLAN: 100 NAME: xXXx > VLAN Type: Permanent > Egress Ports >ge.1.4[Test Notebook], ge.1.48 [Uplink] > Forbidden Egress Ports >None. > Untagged ports >ge.1.4[Test Notebook] > >VLAN: 400 NAME: xxxxx > VLAN Type: Permanent > Egress Ports >ge.1.14 > Forbidden Egress Ports >None. > Untagged ports >ge.1.14 > > >Regards > >Jens --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
