Hi Jason, For the port vlan-id use...
Set port vlan ge.1.1-47 <vlan-id> modify-egress That will remove the port from all other access\untagged egress list. Then for the phones, which I resume are configured with a vlan-id use... Set vlan egress <vlan-id> ge.1.1-48 tagged Use the command above to configure your trunk/tagged ports. You may also want to run this command on your uplink port for both vlan's Kind regards, Simon Read Service Engineer Nashua Communications (Pty) Ltd. Unit 10 Growthpoint Business Park, No 2 Tonnetti Street, Midrand, 1685 Cell: +27 (0)84 676 9200 DDI:+27 (0)10 001 3042 Fax: +27 (0)10 001 2500 [email protected] www.nashua-communications.com -----Original Message----- From: Jason Grubbs [mailto:[email protected]] Sent: 25 May 2012 01:51 PM To: Enterasys Customer Mailing List Subject: [enterasys] Configure a port to use two VLANs We are replacing a Cisco 3750 with an C5K. This switch serves as our phone switch. Some of the Cisco phones have devices that connect through the phones secondary port. How can I configure the ports on the C5K so they use both vlan 200 and vlan 1? I used this command to set them to 200: Set port vlan ge.1.1-47 200 But I am then asked if I want to remove the ports from all other VLANs untagged egress lists? Should I say no if I want to allow traffic on both 200 and 1? Jason Grubbs Network Engineer Pottsgrove School District ________________________________ This email and any files transmitted with it are to be treated as confidential and as such are not to be used or disclosed except for the purpose for which it has been sent. Any views or opinions presented in this e-mail are solely those of the author and do not represent those of the Pottsgrove School District. The School District accepts no liability for any damage caused by this e-mail. The recipient is required to indemnify the School District against any claims for loss or damage caused by any viruses or otherwise. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. This email has been scanned for viruses and malware, and automatically archived by Mimecast SA (Pty) Ltd, an innovator in Software as a Service (SaaS) for business. Mimecast Unified Email Management (UEM) offers email continuity, security, archiving and compliance with all current legislation. To find out more, visit http://www.mimecast.co.za/uem. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
