We are replacing a Cisco 3750 with an C5K. This switch serves as our phone switch. Some of the Cisco phones have devices that connect through the phones secondary port. How can I configure the ports on the C5K so they use both vlan 200 and vlan 1?
I used this command to set them to 200: Set port vlan ge.1.1-47 200 But I am then asked if I want to remove the ports from all other VLANs untagged egress lists? Should I say no if I want to allow traffic on both 200 and 1? Jason Grubbs Network Engineer Pottsgrove School District ________________________________ This email and any files transmitted with it are to be treated as confidential and as such are not to be used or disclosed except for the purpose for which it has been sent. Any views or opinions presented in this e-mail are solely those of the author and do not represent those of the Pottsgrove School District. The School District accepts no liability for any damage caused by this e-mail. The recipient is required to indemnify the School District against any claims for loss or damage caused by any viruses or otherwise. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
