Thanks, Erik!
Is working well, but VLAN 11 is not working properly.
the vlan 11 is only seeing the switches, do not see the vlan100, vlan200.
Build 1: Switch IP: 172.16.0.1
Build 2: Switch IP: 172.16.0.2
43 44 was used as a port of management.
The following configuration of the switch ports of the second building:
B3(su)->show vlan port
Port VLAN Ingress Egress
Filter Vlan
-----------------------------------------------------------------
ge.1.1 11 N tagged: 11,100,200
ge.1.2 100 N untagged: 100
ge.1.3 100 N untagged: 100
ge.1.4 100 N untagged: 100
ge.1.5 100 N untagged: 100
ge.1.6 100 N untagged: 100
ge.1.7 200 N untagged: 200
ge.1.8 200 N untagged: 200
ge.1.9 200 N untagged: 200
ge.1.10 200 N untagged: 200
ge.1.11 200 N untagged: 200
.............
ge.1.43 11 N untagged: 11,100,200
ge.1.44 11 N untagged: 11,100,200
Do you know what might be happening?
2012/7/10 Erik Phillips <[email protected]>
> What about:
> building 1
> set vlan create 11,100,200
> set vlan egress 100 ge.1.1 tagged
> set vlan egress 200 ge.1.2 tagged
> set host vlan 11
>
> building 2
> set vlan create 11,100,200
> set port vlan ge.1.1-6 100 modify-egress
> set port vlan ge.1.7-11 200 modify-egress
> set host vlan 11
>
> Also, netsight (if you have it) can probably do this as well. Check out
> the enterasys channel on youtube,
> http://www.youtube.com/watch?v=HbStJOT_m08 and
> http://www.youtube.com/watch?v=q4VNhLbrmcU&feature=results_main&playnext=1&list=PLD0A4267BC50654DB.
> I think it provides a good start for setups.
>
>
> Erik Phillips
> East Windsor Regional Schools
> (p) 609.443.7738 x1725
> (f) 609.443.7861
> ________________________________________
> From: Gustavo Veras [[email protected]]
> Sent: Tuesday, July 10, 2012 6:55 PM
> To: Enterasys Customer Mailing List
> Subject: [enterasys] VLAN Configuration - Email found in subject
>
> How can I create this setup VLANs on Enterasys?
>
> There are two building:
>
> Building 1:
>
> VLAN 100 - Link1 (Link ISP1)
> VLAN 200 - Link2 (Link ISP2)
> Management VLAN 11 (Sees ISP1, ISP2, Switches)
>
> The two links come into port 1 and 2 on the switch Enterasys B3G124-48.
>
> The buildings are connected by the port 3.
>
> Building 2:
>
> 1 - Switch Enterasys B3G124-48
> 12 - PC
>
> The first vlan (100) would be distributed to 6 computers and vlan 200 for
> the other 6. Vlan11 management.
>
> Is there an easy way to do this?
>
>
>
>
>
>
>
>
> * --To unsubscribe from enterasys, send email to [email protected]
> <mailto:[email protected]> with the body: unsubscribe enterasys
> [email protected]
>
>
> ---
> To unsubscribe from enterasys, send email to [email protected] with the
> body: unsubscribe enterasys [email protected]
>
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
