Where is the routing being done for these vlan's? Patrick Printz Network Infrastructure
Quinsigamond Community College 670 West Boylston Street Worcester, MA 01606-2092 w. 508-854-7517 c. 508-726-9529 "If a man is called a street sweeper, he should sweep streets even as Michelangelo painted, or Beethoven composed music, or Shakespeare wrote poetry. He should sweep streets so well that all the hosts of heaven and Earth will pause to say, Here lived a great street sweeper who did his job well." ~Martin Luther King, Jr. From: Gustavo Veras [mailto:[email protected]] Sent: Wednesday, July 11, 2012 11:04 AM To: Enterasys Customer Mailing List Subject: Re: [enterasys] VLAN Configuration - Email found in subject Thanks, Erik! Is working well, but VLAN 11 is not working properly. the vlan 11 is only seeing the switches, do not see the vlan100, vlan200. Build 1: Switch IP: 172.16.0.1 Build 2: Switch IP: 172.16.0.2 43 44 was used as a port of management. The following configuration of the switch ports of the second building: B3(su)->show vlan port Port VLAN Ingress Egress Filter Vlan ----------------------------------------------------------------- ge.1.1 11 N tagged: 11,100,200 ge.1.2 100 N untagged: 100 ge.1.3 100 N untagged: 100 ge.1.4 100 N untagged: 100 ge.1.5 100 N untagged: 100 ge.1.6 100 N untagged: 100 ge.1.7 200 N untagged: 200 ge.1.8 200 N untagged: 200 ge.1.9 200 N untagged: 200 ge.1.10 200 N untagged: 200 ge.1.11 200 N untagged: 200 ............. ge.1.43 11 N untagged: 11,100,200 ge.1.44 11 N untagged: 11,100,200 Do you know what might be happening? 2012/7/10 Erik Phillips <[email protected]<mailto:[email protected]>> What about: building 1 set vlan create 11,100,200 set vlan egress 100 ge.1.1 tagged set vlan egress 200 ge.1.2 tagged set host vlan 11 building 2 set vlan create 11,100,200 set port vlan ge.1.1-6 100 modify-egress set port vlan ge.1.7-11 200 modify-egress set host vlan 11 Also, netsight (if you have it) can probably do this as well. Check out the enterasys channel on youtube, http://www.youtube.com/watch?v=HbStJOT_m08 and http://www.youtube.com/watch?v=q4VNhLbrmcU&feature=results_main&playnext=1&list=PLD0A4267BC50654DB. I think it provides a good start for setups. Erik Phillips East Windsor Regional Schools (p) 609.443.7738 x1725 (f) 609.443.7861 ________________________________________ From: Gustavo Veras [[email protected]<mailto:[email protected]>] Sent: Tuesday, July 10, 2012 6:55 PM To: Enterasys Customer Mailing List Subject: [enterasys] VLAN Configuration - Email found in subject How can I create this setup VLANs on Enterasys? There are two building: Building 1: VLAN 100 - Link1 (Link ISP1) VLAN 200 - Link2 (Link ISP2) Management VLAN 11 (Sees ISP1, ISP2, Switches) The two links come into port 1 and 2 on the switch Enterasys B3G124-48. The buildings are connected by the port 3. Building 2: 1 - Switch Enterasys B3G124-48 12 - PC The first vlan (100) would be distributed to 6 computers and vlan 200 for the other 6. Vlan11 management. Is there an easy way to do this? * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
