hi,
commands outputs on 6.03 firmware and I hope you can help me ;
C3(su)->dir
Images:
==================================================================
Filename: c3-series_06.61.09.0012
Version: 06.61.09.0012
Size: 10800128 (bytes)
Date: Wed Jul 24 20:41:57 2013
CheckSum: 6c50bf3c52cb9de576af1bb2d52c2ec6
Compatibility: C3G124-24, C3G124-24P, C3G124-48, C3G124-48P, C3K122-24
C3K122-24P, C3K172-24
Filename: c3-series_06.03.03.0008 (Active) (Boot)
Version: 06.03.03.0008
Size: 9876480 (bytes)
Date: Fri Feb 5 07:53:40 2010
CheckSum: 008de8166805a90d293a595f13f9b413
Compatibility: C3G124-24, C3G124-24P, C3G124-48, C3G124-48P, C3K122-24
C3K122-24P, C3K172-24
Files: Size
--More-- <space> next page, <cr> one line, <q> quit
================================ ========
configs:
yedek_17092013 12389
yedek_07082013 10341
logs:
current.log 172049
C3(su)->show port status ge.1.23-24
Alias Oper Admin Speed
Port (truncated) Status Status (bps) Duplex Type
--------- ------------ ------- ------- --------- ------- ------------
ge.1.23 Up Up 1.0G full Combo
RJ45/1000BASE-SX
ge.1.24 Up Up 1.0G full Combo
RJ45/1000BASE-LX
C3(su)->show port advertise ge.1.23-24
ge.1.23 capability advertised remote
-------------------------------------------------
10BASE-T no yes no
10BASE-TFD no yes no
100BASE-TX no yes no
100BASE-TXFD no yes no
1000BASE-T no no no
1000BASE-TFD yes yes no
pause yes yes no
ge.1.24 capability advertised remote
-------------------------------------------------
10BASE-T no yes no
10BASE-TFD no yes no
100BASE-TX no yes no
100BASE-TXFD no yes no
1000BASE-T no no no
1000BASE-TFD yes yes no
pause yes yes no
C3(su)->show port negotiation ge.1.23-24
auto-negotiation is enabled on port ge.1.23
auto-negotiation is enabled on port ge.1.24
C3(su)->show port speed ge.1.23-24
default speed is 10 on port ge.1.23
default speed is 10 on port ge.1.24
C3(su)->show port duplex ge.1.23-24
default duplex mode is half on port ge.1.23
default duplex mode is half on port ge.1.24
C3(su)->show spantree stats act
Spanning tree status - disabled
Spanning tree instance - 0
Designated Root MacAddr - 00:11:88:B3:7B:20
Designated Root Port - 0
Designated Root Priority - 0
Designated Root Cost - 0
Root Max Age - 20
Root Hello Time - 2
Root Forward Delay - 15
Bridge ID MAC Address - 00:11:88:B3:7B:20
Bridge ID Priority - 0
Bridge Max Age - 20
Bridge Hello Time - 2
Bridge Forward Delay - 15
--More-- <space> next page, <cr> one line, <q> quit
Topology Change Count - 0
Time Since Top Change - 1 days 21:49:52
Max Hops - 20
SID Port State Role Cost Priority
--- ---------- ---------------- ----------- -------- --------
0 ge.1.23 Manual forwarding Disabled 0 128
NOTE: on new firmware: STATE ==> Disabled
C3(su)->show spantree stats port ge.1.23-24
Spanning tree status - disabled
Spanning tree instance - 0
Designated Root MacAddr - 00:11:88:B3:7B:20
Designated Root Port - 0
Designated Root Priority - 0
Designated Root Cost - 0
Root Max Age - 20
Root Hello Time - 2
Root Forward Delay - 15
Bridge ID MAC Address - 00:11:88:B3:7B:20
Bridge ID Priority - 0
Bridge Max Age - 20
Bridge Hello Time - 2
Bridge Forward Delay - 15
Topology Change Count - 0
Time Since Top Change - 1 days 21:50:45
Max Hops - 20
SID Port State Role Cost Priority
--- ---------- ---------------- ----------- -------- --------
0 ge.1.23 Manual forwarding Disabled 0 128
0 ge.1.24 Manual forwarding Disabled 0 128
NOTE: NOTE: on new firmware: STATE ==> Disabled
C3(su)->show spantree nonforwardingreason
The non-forwarding reason for port ge.1.1 on SID 0 is None
The non-forwarding reason for port ge.1.2 on SID 0 is None
The non-forwarding reason for port ge.1.3 on SID 0 is None
The non-forwarding reason for port ge.1.4 on SID 0 is None
The non-forwarding reason for port ge.1.5 on SID 0 is None
The non-forwarding reason for port ge.1.6 on SID 0 is None
The non-forwarding reason for port ge.1.7 on SID 0 is None
The non-forwarding reason for port ge.1.8 on SID 0 is None
The non-forwarding reason for port ge.1.9 on SID 0 is None
The non-forwarding reason for port ge.1.10 on SID 0 is None
The non-forwarding reason for port ge.1.11 on SID 0 is None
The non-forwarding reason for port ge.1.12 on SID 0 is None
The non-forwarding reason for port ge.1.13 on SID 0 is None
The non-forwarding reason for port ge.1.14 on SID 0 is None
--More-- <space> next page, <cr> one line, <q> quit
The non-forwarding reason for port ge.1.15 on SID 0 is None
The non-forwarding reason for port ge.1.16 on SID 0 is None
The non-forwarding reason for port ge.1.17 on SID 0 is None
The non-forwarding reason for port ge.1.18 on SID 0 is None
The non-forwarding reason for port ge.1.19 on SID 0 is None
The non-forwarding reason for port ge.1.20 on SID 0 is None
The non-forwarding reason for port ge.1.21 on SID 0 is None
The non-forwarding reason for port ge.1.22 on SID 0 is None
The non-forwarding reason for port ge.1.23 on SID 0 is None
The non-forwarding reason for port ge.1.24 on SID 0 is None
The non-forwarding reason for port lag.0.1 on SID 0 is None
The non-forwarding reason for port lag.0.2 on SID 0 is None
The non-forwarding reason for port lag.0.3 on SID 0 is None
The non-forwarding reason for port lag.0.4 on SID 0 is None
The non-forwarding reason for port lag.0.5 on SID 0 is None
The non-forwarding reason for port lag.0.6 on SID 0 is None
2013/9/22 Markus Kaiser <[email protected]>
>
> show port status
> and
> show spantree stats act
> show spantree stats port ge.x.x
> show spantree nonforwardingreason
>
>
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
