Not exactly what you are looking for, but... I have an AP in every "teaching space". I set the Min Basic Rate (AP > Radio > Advanced) to 24Mbps. This helps deal with clients associating/disassociating in high density deployments. Jeff
>>> We have Enterasys 4110 controllers running 8.31 software and about 400 AP, mostly 3620 and 3710. Is there any way to control how *sticky* a client device will be to a particular AP? I realize that AP re-association can be disruptive and you don*t want that happening too much. I do notice though that in some locations where we are getting user complaints about wifi performance, a client device that wanders around will stay associated with a distant AP with a weak signal much longer than I would like it to, rather than re-associating with a much closer and stronger AP. Is there any way to set a minimum signal-strength for association? Better yet would be a delta-threshold; i.e. if the AP-2 signal is 5-db better than AP-1, then re-associate. Thanks JD --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
