Hi Dennis, I have tried your solution, but there are a problem.
I eliminate host D and I changed number of ports and vlan id, then I typed the commands below: Port of Host A (switch 1 ge.1.7): set port vlan ge.1.7 1 mod set vlan egress 101 ge.1.7 untagged set vlan egress 102 ge.1.7 untagged Port of Host B (switch 1 ge.1.10): set port vlan ge.1.10 101 mod set vlan egress 1 ge.1.10 untagged Port of Host C (switch 2 ge.1.24): set port vlan ge.1.24 102 mod set vlan egress 1 ge.1.24 untagged Uplink ports (ge.1.48 on both switches): set vlan egress 1 ge.1.48 tagged set vlan egress 101 ge.1.48 tagged set vlan egress 102 ge.1.48 tagged After this configuration, if in host A I do a ping to B, I have a answer, it's right, but if I do a ping to host C, I have no asnwer, it's undesirable. What is wrong? Follow "show vlan" of the switches 1 and 2. Switch_1(su)->show vlan VLAN: 1 NAME: DEFAULT VLAN VLAN Type: Default Egress Ports ge.1.1, ge.1.3-10, ge.1.13-15, ge.1.19-26, ge.1.28, ge.1.30, ge.1.32-34, ge.1.36-39, ge.1.45-48 Forbidden Egress Ports None. Untagged ports ge.1.1, ge.1.3-10, ge.1.13-15, ge.1.19-26, ge.1.28, ge.1.30, ge.1.32-34, ge.1.36-39, ge.1.45-47 VLAN: 101 NAME: VLAN Type: Permanent Egress Ports ge.1.7, ge.1.10 Forbidden Egress Ports None. Untagged ports ge.1.7, ge.1.10 VLAN: 102 NAME: VLAN Type: Permanent Egress Ports ge.1.7 Forbidden Egress Ports None. Untagged ports ge.1.7 Switch_2(su)->show vlan VLAN: 1 NAME: DEFAULT VLAN VLAN Type: Default Egress Ports ge.1.3-4, ge.1.6-9, ge.1.11, ge.1.13-22, ge.1.24-26, ge.1.35-36, ge.1.38, ge.1.48 Forbidden Egress Ports None. Untagged ports ge.1.3-4, ge.1.6-9, ge.1.11, ge.1.13-22, ge.1.24-26, ge.1.35-36, ge.1.38 VLAN: 101 NAME: VLAN Type: Permanent Egress Ports ge.1.48 Forbidden Egress Ports None. Untagged ports None. VLAN: 102 NAME: VLAN Type: Permanent Egress Ports ge.1.24, ge.1.48 Forbidden Egress Ports None. Untagged ports ge.1.24 Thanks, Rogerio --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
