I'm trying to configure PIM-SM on a Enterasys N7 so Multicast traffic can route from a server hanging off the N7 to a Vlan Trunk going to a Cisco 3750 where some phones are located. I was just wondering if I could have another pair of eyes look at my config because it's not currently working. This is what I have, please tell me if I'm missing anything.
interface vlan 5 *** this is the vlan our computers sit on. It's here because it's in the trunk going to the 3750 ip address 10.205.1.1 255.255.248.0 ip pim sparse-mode interface vlan 10 *** this is the vlan our phones are on ip address 10.210.1.1 255.255.248.0 ip pim sparse-mode interface vlan 20 *** this is where the server is hanging off ip address 10.220.1.1 255.255.248.0 ip pim sparse-mode ip pim bsr-candidate vlan 5 ip pim rp-candidate 10.205.1.1 224.0.0.0 224.0.0.0 Joshua Sanders Asst. Vice President - Systems Operations Western Mutual Insurance Group [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
