Dennis & Christopher,
Thanks for the replies. Would I want igmp query-enable on the vlan
with my phones as well?
Joshua Sanders
Asst. Vice President - Systems Operations
Western Mutual Insurance Group
From: "Yingst, Christopher" <[email protected]>
To: "Enterasys Customer Mailing List" <[email protected]>
Date: 10/21/2014 06:16 AM
Subject: Re: [enterasys] Multicast config
Joshua,
You need IGMP as Dennis stated.
Set igmp enable <VID> <—All VLANs that will have clients/servers/or in
path
Set igmp query-enable <VID> <— Only VLANs with Client/servers
I think you need to fix your “group mask” as well:
ip pim rp-candidate 10.205.1.1 224.0.0.0 255.0.0.0
Do you actually need that many multicast groups?
Regards,
Chris
From: "[email protected]" <[email protected]>
Reply-To: "[email protected]" <[email protected]>
Date: Monday, October 20, 2014 at 7:22 PM
To: Enterasys Customer Mailing List <[email protected]>
Subject: [enterasys] Multicast config
I'm trying to configure PIM-SM on a Enterasys N7 so Multicast traffic can
route from a server hanging off the N7 to a Vlan Trunk going to a Cisco
3750 where some phones are located.
I was just wondering if I could have another pair of eyes look at my
config because it's not currently working. This is what I have, please
tell me if I'm missing anything.
interface vlan 5 *** this is the vlan our computers sit on. It's here
because it's in the trunk going to the 3750
ip address 10.205.1.1 255.255.248.0
ip pim sparse-mode
interface vlan 10 *** this is the vlan our phones are on
ip address 10.210.1.1 255.255.248.0
ip pim sparse-mode
interface vlan 20 *** this is where the server is hanging off
ip address 10.220.1.1 255.255.248.0
ip pim sparse-mode
ip pim bsr-candidate vlan 5
ip pim rp-candidate 10.205.1.1 224.0.0.0 224.0.0.0
Joshua Sanders
Asst. Vice President - Systems Operations
Western Mutual Insurance Group
[email protected]
--To unsubscribe from enterasys, send email to [email protected] with the
body: unsubscribe enterasys [email protected]
NOTICE - This communication may contain confidential and privileged
information that is for the sole use of the intended recipient. Any
viewing, copying or distribution of, or reliance on this message by
unintended recipients is strictly prohibited. If you have received this
message in error, please notify us immediately by replying to the message
and deleting it from your computer.
--To unsubscribe from enterasys, send email to [email protected] with the
body: unsubscribe enterasys [email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
