>From: "Alex" <[EMAIL PROTECTED]>
>
>Hey all, this is a bit of a follow-up to a previous thread, that discussed
>some ideas for extending the reach of the RS60E3 remote switch. I stopped
>by my local Radio Shack and they didn't seem to have any 2.5mm (submini)
>extension cables, but they did have 3.5mm. So, I bought a 3.5mm extension
>cable and a pair of adapters (2.5 - 3.5 and back again).
>
>However, when plugged into the camera, the camera behaves as if the shutter
>is being held down half-way; i.e., the autofocus is constantly being
>engaged, the metering information shows on the top LCD, etc. Anyone have
>any ideas why it's doing this, and what I can do to fix it? Is it just a
>problem of having too many things on the wire between the camera and the
>switch? BTW, all of the parts are mono--maybe everything needs to be
>stereo, so there's multiple wires inside the cable? I don't know. Any
>help
>would be appreciated. :)
>
>--Alex
Hi Alex!
It has to be stereo, for two step operation, with mono it is as you have
pressed shuter button half way.
Good light
Grega
********************
Grega Fenko
Topolsica 57
SI-3326 TOPOLSICA
SLOVENIA
http://fenko.8m.com
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
