>> Julian Loke wrote:
>>Generic 430EZ Flash manual :-)
>>1) Install batteries
>>2) Mount flash in hotshoe of camera that has film/sensor & batteries
>>3) Switch Flash ON
>>4) Push shutter release button
>>5) If OK indicator doesn't glow, move closer and try #4 again
> "Neil K." <[EMAIL PROTECTED]>
> Er. But the 430EZ ain't got an OK indicator.
Hi Neil,
It does and it doesn't.
The 430Ez will give an A-TTL "out of range" warning, but only with
a few early EOS bodies.
The 430EZ "Flash-ready" indicator can be used as a secondary flash OK
indicator.
If the flash was quenched by TTL, the indicator glows red or green.
Underexposure occurs if a full power flash does not give sufficient
light. If a full power flash occurs, the indicator stops glowing
briefly during recharge, and underexposure was possible.
Is it wrong to use the Flash Ready indicator in this way?
Cheers
Julian Loke
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
