>I do get a little visible "readjustment" with my A2 and 28-135, but not
>enough to call it a "shake."
>As long as we are on the subject of EOS5/A2 and IS, I just got a 100-400
>IS, and, with my A2, there is an audible "clunk" when IS kicks in and
>out. I don't remember this with the example I rented, is this normal?
>Skip
Skip,
I also hear and feel the "Rattle" as I like to call it with the 100-400 IS
L on my A2. As per my instruction manual it is normal. Have never had a
problem with image quality so it must be ok. Have hand held that lens at
400mm with a shutter speed of 1/10 of a second and gotten a sharp pic. I
recently purchased a 28-135 IS and while checking it out on my A2 at the
dealer I could not feel the "Rattle" when I let go of the shutter
button. I thought something was wrong with the lens. After getting it
home I used it with a slower shutter speed and could feel that "Rattle"
when I let go of the button. A couple times I couldn't feel the "Rattle"
and found that IS was off when I thought it was on. That has saved a
couple of low light photos for me.
Hope this helped
Tom
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
