I wouldn't risk it unless you can get that information out of Canon. Call their technical support line; I've found them to be very helpful when I had that kind of question.
Also, If you really want to use the flash and the camera won't take it, then find some aspiring electrical engineer to slap together a low latency voltage regulator for you with sync plugs on either end. On Fri, Apr 13, 2007 at 01:35:25PM +0800, Roland Lim wrote: >I've read off a photo.net post and a couple other sites that the EOS >350D can handle the high trigger voltage (up to 250v) of some of the >older flashes. I have an old Mecablitz flash that i want to use on my >350d, and it has a trigger voltage of 60+ volts. Before I test it out, >can I just see if anyone else has used a flash with a high trigger >voltage successfully (did not fry your cam), on your 350d? Do you guys >think there are any longer term repercussions of using a high trigger >voltage flash on the 350d? -- void *(*(*schlake(void *))[])(void *); * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
