Hi all,

While doing some 'frozen flash' images I discovered some unexpected
behavior of the EOS 5D:

Some background first:

FP Flash, also known as High Speed Sync and denoted with the H(Bolt)
icon is normally used for fill-in flash in bright conditions where
your shutter speed exceeds the XSync limit (1/200 on the 5D). That way
you can keep using wire apertures to achieve a nice background blur
and still flash your subject for fill-in. It actually works by firing
a seemingly continuous beam of light for the length of time that the
shutter is open (avoiding in that way the banding that you would
observe otherwise). This feature requires a much higher energy output
than normal flash and therefore your flash range is dramatically
reduced.

Well, all this bg info is to be able to explain the bug in simple terms:

Even when FP Flash mode is active on the flash (H[bolt] icon active on
the flash LCD or red led lighted up on the ST-E2), the FP mode should
only activate when your shutter speed exceeds XSync speed.  The
problem I found is that the 5D is activating the FP mode also when
used at XSync speed. This behaviour is unexpected and certainly
undesired, given that it will dramatically affect flash exposures. It
reduces the flash range, increases recycle times and consumes
batteries faster.

To make it very concrete: If you have FP flash active on the flash and
your shutter speed is 1/200, the flash will fire in FP flash mode
(also called 'long burning'), so instead of having a typical flash
duration of 1/10000, the flash will fire for 1/200, an exposure 5x
longer!

The tricky side of this bug is that there's no apparent visible
difference between normal flash and FP flash.  You can only observe
this bug by photographing a rapidly moving subject, like running
water. In my case I was photographing an hourglass running and noticed
the bug when I was unable to freeze the sand grains falling, even with
the lowest flash power setting (that is supposed to have a duration of
about 1/35000 of a second)

I've submitted this bug to Canon and I'm still waiting for a response.
It would be nice if some of you, using an EOS5D and a Speedlite could
try reproduce the problem.  That way I will know if it's only an issue
in my camera.

You can see the images that triggered the whole story on my blog:
http://www.gerardmaas.net

greetz, Gerard.
*
****
*******
***********************************************************
*  For list instructions, including unsubscribe, see:
*    http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************

Reply via email to