----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Afternoon all, I have a small problem and am hoping someone has found an easy way. I went to change the wing walks on 904. One side was an old sandpaper material and paint. It came right off. The other side is some type of plastic material. This stuff will not come off. I have tried three types of paint striper and one type of adhesive remover. I have used two quarts of striper. The best any of them does it to let me pull off strips about one-eighth inch by one inch at a time. The striper seem to work a little under the edge of the walk. With about four square feet of wing walk, I would like to find a faster way. Since the new walk is narrower than the old, I would prefer not to use a razor blade because I am going to have polish the area not covered by the new walk. 904 is not painted. Any ideas? Richard N99904 ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
