----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Do you have the Aircraft Spruce Catalog? They have a very good 'plumbing' diagram in there, and they sell all the bits and pieces. This used to be a tough job, involving aluminum hard tubing and working behind a panel. It's much easier with the flexible stuff that's around now.
Greg At 04:27 PM 1/15/2003 -0700, Randy Helm wrote: ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Does anyone know what works to connect to the existing static line (from where it comes into the airspeed indicator) and continue it on to run a couple of other instruments. I plan on attatching tubing over the existing line and on to the verticle speed and altimeter. Has anyone done this before. Any ideas on what size tubing works best. Also I am planning on installing a double venturi so I can run a DG. Can I have one venturi on each side? Thanks, Randy To leave this forum go to: http://ercoupers.com/lists.htm ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
