----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 12:05 AM 2/5/03 -0600, William R. Bayne wrote:
If CHT and EGT units measure wire resistance, why wouldn't the "standard"
lead be long enough to reach "number 4 jug without a patch"?
Usually, all the wires are the same length - irrespective of which
cylendar
they go to.
That way, the switch you describe below works. The extra lenght is simply
coiled up
in such a way that the insulation will not burn off.
>If you can't lengthen just one, it would seem Pete's (rhetorical) point
on
>(unnecessary extra) cost of installation remains valid.
It is indeed valid, Bill. Just pointing out why.
Percy in Portland
==========================================================================
====
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
