Re: [COUPERS-TECH] AD 2002-26-02

[Jim Phelps]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- I know other will say this--Don't cut he holes until they make it mandatory, You still can't see enough with holes and of you find more than surface corrosion you will have to take the wings off anyway. Take the wings off(no big deal) and inspect it under that provision. And lets all fight any ruling to make cutting holes mandatory.   Jim Phelps 2749H ----- Original Message ----- From: alan1 To: tech@ercoupers.com Sent: Thursday, May 01, 2003 4:29 PM Subject: [COUPERS-TECH] AD 2002-26-02 ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Does anyone know of a less expensive method of compliance with AD 2002-26-02, wing center section inspection? Univair wants almost $200 for 8 inspection plates and some miscellaneous hardware!!  I think that is a bit excessive.  Maybe I am wrong, but I just have a feeling that there should be some alternative source or method.               O *<==N99616==>*           /    \         o      o          Alan ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/ ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/