----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I don't have an example on hand to measure, but I have noticed that the stainless steel wire that Skyport sells is larger in diameter than that which Univair carries. I had cause to order one of the Bowden cable end pieces, so I ordered the whole business from Univair and the wire was noticible smaller. I have had a lot of difficulty threading the larger wire into one of the trim wire setups that use the flexible Bowden cable all the way from elevator to cockpit control. I admit to being confused as to just what serial numbers had Bowden cable all the way back and which ones had the trim wire running through tubing down the fuselage. Initially, I had thought that the flexible bowden cable all the way was only used on those planes that had been fitted with a trim tab after leaving the factory. However I had a sticky trim cable on a G model recently and when investigating, I found Bowden cable running the whole length of the fuselage. Cheers: Paul NC2273H ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
