----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I used pop rivets. Very easy to do.
Dick & Nancy [EMAIL PROTECTED]
----- Original Message -----From: RichardSent: Wednesday, October 15, 2003 5:59 PMSubject: [COUPERS-TECH] Lacing clips----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I am missing a few lacing hooks on the seat back and bought a bag full
of the Brass Plated hooks.
Question, what type of riveting tool is used to set these clips? I can
fabricate an anvil and have a tool to expand tube end of the rivet but
am interested in what is proper. Also if anyone need a few of the
hooks, send me a message and I'll get them off to you. For those
interested, I bought the clips from Zack White Leather company.
www.zackwhite.com. Their phone is 800-633-0396.
Part number was:
TT-9285-NP or BP (Nickel Plated or Brass Plated)
Rich Blair
N99997 4J6
St. Marys, Georgia
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
