----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I , Used none harding permatex ,25h dont leek for the last two years..I put hard setting on 610 it dont leek . The hard setting Is hell toclean off later on.. Regards, Ken The drunken Irishman ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "ercoupe tech" <[email protected]> Sent: Wednesday, May 12, 2004 2:35 PM Subject: [COUPERS-TECH] gaskets and sticky stuff > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > Now that I am into the process of re-attaching all the hoses and wires and > other stuff to the engine after overhaul I am faced with the issue of > what to do with a couple of gaskets. > > Specifically, the fuel pump gasket and the starter motor gasket. It seems > that opinions vary about whether to use something sticky to seal the > gaskets, or whether they are designed to be used dry, with the torque doing the > sealing. > > What say you list? > > Steve Finkelman > C-FIWR > > > > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers-tech/ > > > > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
