----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Go to the zeftronics site http://www.zeftronics.com/ Select Troubleshooting, then Delco-Remy, then 14 Volt Type A Also check out the Generator Controllers G1XXON data sheet and their FAQ's David Abrams http://ercoupe.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 26, 2004 8:54 PM To: ercoupe tech Subject: [COUPERS-TECH] voltage regulators ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- I am just putting together my forney engine installation after overhaul and I had to figure out what wire to put where in hooking up the generator and voltage regulator. After staring at the wiring diagram in the forney manual it all became quickly clear. But now I have another question for those electro-techno types. How does a voltage regulator work, and what is the meaning of all those wires connected to it? Steve Finkelman Forney C-FIWR ========================================================================== == == To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/ ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
