----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
With a wing pull alone, you cannot see all areas. I have
discovered corrosion on two planes that could not be seen with the wing pull
method. The corrosion was found when the inspection openings were put
in.
I personally will not sign off this AD anymore by just pulling
the wings. I advocate inspection openings AND wing pull for the initial
inspection.
The wing pull however will satisfy the 3 year requirement when
all the other stuff is done along with it. (interior sound proofing,floor
boards, etc)
Cheers:
Paul
NC2273H
When the wings are pulled to do a center section inspection, is a borescope necesssary to see everything? Or can a good job be done without it? With a wings pull, does that meet a once every three year inspection requirement? Thanks....Roger
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
