----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Paul, Hartmut,
Thanks....Roger
----- Original Message -----From: Paul M. AntonSent: Sunday, May 30, 2004 12:44 PMSubject: Re: [COUPERS-TECH] Center section question----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----With a wing pull alone, you cannot see all areas. I have discovered corrosion on two planes that could not be seen with the wing pull method. The corrosion was found when the inspection openings were put in.I personally will not sign off this AD anymore by just pulling the wings. I advocate inspection openings AND wing pull for the initial inspection.The wing pull however will satisfy the 3 year requirement when all the other stuff is done along with it. (interior sound proofing,floor boards, etc)Cheers:PaulNC2273H
When the wings are pulled to do a center section inspection, is a borescope necesssary to see everything? Or can a good job be done without it? With a wings pull, does that meet a once every three year inspection requirement? Thanks....Roger============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
