[COUPERS-TECH] Nose gear spring

[William R. Bayne]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Good morning Coupers, the nose gear spring is stuck really hard in the housing and I can't seem to budge it. I thought about heating the housing but the spring and housing are both steel so don't reckon that will work. Then I thought of making a tool with a slide hammer, used in bodywork shops, and weld a special hook on the end, however this is not as easy as it seems, the slide hammers are not long enough so an extension would have to be made. Have any of you had this propblem and found a fix which would work? No sense reinventing the wheel when one of you has probably been there, thanks,Pete.==============================================================================To leave this forum go to: http://ercoupers.com/lists.htmSearch the archives on http://escribe.com/aviation/coupers-tech/