RE: [COUPERS-TECH] Aerocoupe Sliding Side Windows

Tue, 22 Jun 2004 10:52:55 -0700 

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I have tw0  46 ,One has in on the front ,one on the back . 39h is on back, 610 on front .  Ken
----- Original Message -----
From: Ed Burkhead
To: Coupe-Tech
Sent: Tuesday, June 22, 2004 11:20 AM
Subject: RE: [COUPERS-TECH] Aerocoupe Sliding Side Windows

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

 

Kevin,

 

I?m pretty sure the plate was on the rear on mine, born as a 415-CD.  I think I?ve heard that it?s on the front on some models.

 

Ed Burkhead

http://edburkhead.com/

ed -at- edburkheadQQQ.com    (change -at- and remove the QQQ)

 

 

-----Original Message-----
From: Kevin Gassert [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 22, 2004 7:31 AM
To: 'Ed Burkhead'; 'Donald Perricone'; 'Coupe-Tech'
Subject: RE: [COUPERS-TECH] Aerocoupe Sliding Side Windows

 

Pretty sure the plate is in the front.

 

Kevin

 

 

From: Ed Burkhead [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 22, 2004 12:06 AM
To: Donald Perricone; Coupe-Tech
Subject: RE: [COUPERS-TECH] Aerocoupe Sliding Side Windows

 

 
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
 
 

 

At the top of the rear canopy rim, where the two windows would meet at the top, you?ll see a small metal plate secured by a couple of metal screws.

 

Remove these screws and the plate.

 

Now slide one window up to the top.  The back side of the window can now be lifted up out of the big cutout in the canopy frame.  As you do this, pull the window toward the back of the plane to pull it out of the front grove. 

 

Now you should be able to slide the whole window up and out of the plane through this gap.  Repeat with the other window.

 

Only moderate sweat and minor cursing.  Otherwise, no problem.  Well, be gentle when you put the new windows in so you don?t crack them while inserting them ? that causes lots of cursing.

 

Ed Burkhead

http://edburkhead.com/

ed -at- edburkheadQQQ.com    (change -at- and remove the QQQ)

 

 

-----Original Message-----
From: Donald Perricone [mailto:[EMAIL PROTECTED]
Sent: Monday, June 21, 2004 10:37 PM
To: [email protected]
Subject: [COUPERS-TECH] Aerocoupe Sliding Side Windows

 

 
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
 
 
Anyone:
 
The plexiglass windows on each side of the cockpit on the 412C need to be replaced because the glass is too thick and doesn't slide up and down.  The question is "How do you get the the side panels out"?
 
Can anyone help us.
 
Don Perricone
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/

Reply via email to