----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Based on my experiences with Univair, I have to agree with Don. I live in the southeast and Bill has always been my sales rep. He has never hesitated to go out in the back and find out what they have. They even manufactured a part for me, the brace between the tops of frame 'E', when they were out of stock. I received it in 8 working days from my request and the price was reasonable. I also bought the trim system conduit from cockpit to the tailcone and after receiving it decided that it would be very simple to make myself. I returned it and was given a prompt refund. When I needed the aileron skin stiffeners to replace those found corroded (yes the inside of the ailerons are another place where corrosion hides, who looks inside of the ailerons?) Bill pulled the drawings and sent me a sketch identifying the pieces and part numbers. I received the sketch the next day by email. Not bad. My experience with Bill at Univair and Lee when he was at Skyport has been pleasant and productive. Rich Blair N99997 @ 4J6 Kingsland, Ga. ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
