----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Norm
I have directions on
making new rear windows for the coupe on my web site
David Abrams
http://ercoupe.com
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 15, 2004 8:34 PM
To: [email protected]
Subject: [COUPERS-TECH] Recommended Clearance Drill Sizes for Windows
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi,
I just received a set of rear windows for the coupe. The instructions
show how to alter the drill for drilling the acrylic but it does not have the
drill bit size to use ie (9/32?). The last person who installed the
windows probably used a drill bit that was too small as all the holes have
spider cracks around them. I would like to aviod this problem but I do not want
to go overboard with the clearance. Any suggestions would be
appreciated.
Thanks again
Norm Decou
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
