----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 08:34 PM 9/15/2004 -0400, [EMAIL PROTECTED] wrote: >I just received a set of rear windows for the coupe. The instructions >show how to alter the drill for drilling the acrylic but it does not have >the drill bit size to use ie (9/32?). Norm: The screws should be #6, which measure about 0.135. Use a 5/32 drill, or 11/64 if you're really concerned. It's the clamping force, not the shear strength of the screws that holds the window. John Cooper Skyport Services PO Box 249 4996 Delaware Tnpk Rensselaerville, NY 12147 518 797-3064 ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
