----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
This is another “which way does it go” question.
During this annual that is beginning to look like it will
take a year, we have found yet another thing we are not sure of. The bracket/arm on the bottom of the
elevator that the control rod connects to has two holes in it. When we took the tail assembly off of the
airplane we noted that the rod was connected to the
forward most hole. As we are
preparing to re-install, I have noticed that the rear
hole has a bushing in it and the front does not. I have
consulted the service manual and the illustrated parts book with nothing
definitive. One of the photos in
the parts book looks like the control rod goes to the back hole and a cable
that I assume is an old style trim control hooks into the front. Can any one verify this? Thanks
N93929
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
