----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I'm in the process of rebuilding my MLG struts. I need the following information. 1. What type of fluid should I use in the struts (I have the original style o-rings)? 2. What's the proper procedure in filling the struts with fluid so I don't over or under-fill them? 3. How can I verify whether the rubber shock pads are good? Is there some MIN-MAX dimension in thickness or ?? 4. OK, what's the trick (or the right tool) to re-install the snap ring on the cylinder that retains the cap (sorry if my terms are not properly named). Thanks for all the help you keep giving us new Ercoupers. Richard (N94004) ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
