----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi,
I am finished the repairs to my tail section.
I am putting the trim cable back on and I have two questions
(requests).
1. Does anyone have a picture of the fasteners that attach the trim cable
to the trim tab. I have the parts catalogue, the AD book and the
service bulletins. If there is a picture in one of these manuals that
I have not found please let me know.
The trim tab in my Ercoupe is the type that is
controlled by a handle on the left side of the cockpit.
2. I cannot remember any fairleads where the trim cable runs between
the elevator and the horizontal stabiliser. The cable seems to rub in this area
and I want to make sure that nothing was dropped and lost during
disassembly. If there are fairleads in this area please let me know.
Any Help on these two items would be greatly appreciated.
Thanks again
Norm Decou
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
