----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Elaine::
From one who has made the lens:: No it
couldn't!
In order for the plastic to be molded without
discoloration it has to be made out of Lexan which requires a Male and Female
mold in order for the plastic to remain the same thickness around the leading
edge curve, and to keep the plastic edges at right angles.
I only did it once!
Wayne Woollard
----- Original Message -----
From: Elaine CampbellSent: Monday, December 06, 2004 1:27 PMSubject: [COUPERS-TECH] Plexiglass leading edge landing light lens----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Has anyone made a mold with which to conform a plastic lens to fit into the wing of an A2A over the landing light? I was thinking plaster-of-paris might be an acceptable medium, but it couldn't be that easy, could it?Elaine 5466F============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
