----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
There should at least be a clamp on each end or all you are moving is the slack in the housing. DICK NANCY & SOPHIE -------Original Message------- From: Tommy Terry Date: 12/19/04 08:02:23 To: [EMAIL PROTECTED] Subject: [COUPERS-TECH] Trim cable 93929 is finally back in the air, sort of. After 3 months of annualizing, I made the test flight on Wednesday. The only problem I could find was the trim cable will not set still. The sheath moves as much as the cable itself. The book only calls for one adelle clamp in the horizontal stabilizer and it is there. Any ideas out there? Tommy N93929 ========================================================================== === To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/ ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
