----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 02:38 PM 1/4/2005, you wrote: >I had some success in making my own. I took a jar, put approriate >fittings in the lid, and pressurized it with a bicycle pump. But the >real one works better. More complicated than necessary. Go to the auto store and get a pump type oil can. Go to the hardware store and get a length of clear plastic 1/4" hose. If you have Goodyears you'll need to make up an adapter that will connect the hose to the bleed port. A hollow bolt shank'll do it. Fill the can up and pump until the fluid enters the master. Don't over do it as you want room to do the other side. Don't let the can run empty or you have to start over. John Cooper Skyport Services PO Box 249 4996 Delaware Tnpk Rensselaerville, NY 12147 518 797-3064 ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
