----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Robert,
Skyport hasn’t got a
website yet, this week. Ask again
in a couple of weeks. ;-)
In the mean time, you can
contact him at:
Skyport Aircoupe Services, Attn: John Cooper
P.O. Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
(800) 624-5312
518
797-3064
non-800 number
[EMAIL PROTECTED] Skyport business
[EMAIL PROTECTED] Airport business
Airport NY86
Ed Burkhead
http://edburkhead.com
ed -at- edburkheadQQQ.com (change -at-
and remove the QQQ)
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: Saturday, April 09, 2005
11:48 AM
To: Ed Burkhead;
[EMAIL PROTECTED]; Coupe-Tech
Subject: RE: [COUPERS-TECH] FUEL
GAUGE
John,
I
had a nose-tank cork gas gauge sink – in the middle of a flight. I can assure you that gave me some
pucker factor. After landing, I
took it out and let it air out in the sun while sealing the tank opening with a
plastic bag.
After
a week of setting in the air and sunshine, it dried out enough to work well for
a while (even without being re-varnished) till I got the nice glass tube
gauge. There’ve been some good
discussions on what varnish to use to re-coat the cork and I hope experts will
tell you which to use. Before you
re-coat it, if you leave it in the sun and breeze for a week or three, it ought
to dry out just fine.
Ed Burkhead
http://edburkheadcom
ed
-at- edburkheadQQQ.com (change -at- and remove the QQQ)
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: Saturday, April 09, 2005
7:44 AM
To: [email protected]
Subject: [COUPERS-TECH] FUEL GAUGE
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
HI ALL
MY FUEL GAUGE HAS GOTTEN GAS LOGGED DUE TO A VERY SMALL PIECE OF CORK CHIPPING OFF. WHAT WOULD BE A GOOD WAY TO DRY IT OUT AND WHAT WOULD BE A GOOD PRODUCT TO USE TO RECOAT IT? I USE AUTO GAS I BOUGHT THESE GLASS TUBE GAUGES FROM SKYPORT AND THERE GREAT.= I HIGHLY RECOMMEND THEM.
THANK TO ALL,
JOHN==============================================================================To leave this forum go to: http://ercoupers.com/lists.htmSearch the archives on http://escribe.com/aviation/coupers-tech/==============================================================================To leave this forum go to: http://ercoupers.com/lists.htmSearch the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
