----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 12:12 PM 4/19/2005, Ed Burkhead wrote: >Problems I had with Lexan: Don't forget "turns to mush in the presence of gasoline..." Plexiglas is a very inconsistent product. .060 plexi has a tolerance of between .033 and .083. .033 is really too thin for the side windows. I go with .080 which is minimum .052. Problem is if you get .080 at the max it's sometimes hard to get it to slide up and down smoothly. (The max is .102) Oh, it's not unusual to see measurements near both extremes in the same window... John Cooper Skyport Services PO Box 249 4996 Delaware Tnpk Rensselaerville, NY 12147 518 797-3064 ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
