----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
My mechanic said that for safety it was best if I shut off the fuel
to the engine at on the panel and let it run until it quit. Then
you're safe against a mag accidentally left hot, and there will be no
fuel left in the carb that could present a danger. If you just shut
off the mags, you may see fuel condensing in the carb and then dripping.
Larry
On Oct 13, 2005, at 1:37 PM, [EMAIL PROTECTED] wrote:
----[Please read http://ercoupers.com/disclaimer.htm before
following any advice in this forum.]----
What procedure do you all follow to turn off the Ercoupe (without
mixture
control)?
On Cessnas, I learned to turn the plane off with the mixtuure control.
The previous owner of my 415C told me to:
1. Shut off fuel valve under control panel.
2. Turn off master switch
3. Turn off engine with magneto switch
Is this the right way??
Eliacim Cortes
N87071
======================================================================
========
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
