----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Connect with Mark Harden the FBO in Terrell, Texas. He's very `coupe oriented and can help you with the repair. He might even have a trailer. And if you're ever in the Roswell area, drop by. Percy in NM, USA -----Original Message----- From: LeBaron Timothy [mailto:[EMAIL PROTECTED] Sent: Thursday, November 17, 2005 10:33 AM To: [email protected] Subject: [COUPERS-TECH] Rear spar attach fittings and trailer needed. ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Greetings all. I bought N99547 several years ago because it was my fathers back in the 60's. Athough it was in annual, it needed some work. With a career change and move from Indiana to Texas on the horizon it was put in storage. Now that things are starting to settle down a bit my thoughts are starting to get back to the coupe. I need help in two area's. First, I need to find a trailer in the Arlington, Texas, area to transport the coupe from Indiana to Texas. Second of all, while looking over the wings I found that the rear spar attach fittings were rusting between the spar and the fitting. I removed the fittings and remarkably the spar was in good shape, but the fittings are pitted bad and will need to be replaced. Does anyone have a clue as to were I can find replacement fittings? Or perhaps they can be fabricated out of 4130? Any thoughts would be appreciated. Tim LeBaron ============================================================================ == To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/ ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
