----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
In a message dated 11/29/2005 10:16:15 PM Eastern Standard Time, SGLASE writes:
Hello,Wanted to check some issues with the group.Has anyone had experience with a fabric recovering system that goes by the name "HIPEC" ??? It is supposed to be a Low Tox alterative to traditional dope. They have a website and I thought is saw ercoupe in approval list for Cert. (Correction, it may be pending FAA approval)Also want to find out if I can do my flight training in a 415E with rudder pedals (Not LSA), then hoping to purchase and restore a 415C for checkout and personal use thereafter under LSA rules.Finally, I have a stainless header tank from a coupe. Seams are soldered. One seem has a small tear. Is the solder the same stuff that is used for circuitboards and commercial electronics ? I was hoping to heat it up briefly with a small butane torch and let the solder flow back into the open seam.Thanks,"Sparky"
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
